| Network Interface or System Type
|
Remote Printer Queue (RMTPRTQ) Value/Queue Name
|
| Argecy ACC 6xe Coax/Twinax to Ethernet print server
|
'LBLPRT1'
Note:
See the section entitled
Information Concerning Print Servers Designed for Twinax SCS Printers
below.
|
| Avery Dennison Printers
|
'lp'
|
| Axis LAN Adapters (external print servers)
|
same as IBM Network Print Server (NPS):
'pr1'
|
| Axis 1620 for Canon PCL Printers
|
same as IBM Network Print Server (NPS):
'pr1'
|
| Axis 5400+
|
same as IBM Network Print Server (NPS):
'pr1'
|
Axis 5600+
Axis 5800+ Mobile
Axis 5900
|
same as IBM Network Print Server (NPS):
'pr1'
|
Axis 540+
Axis 560
Axis 5810 Print Plus
|
same as IBM Network Print Server (NPS):
'pr1'
|
| Axis Office Basic
|
'LPT1'
|
| Axis PrintPoint 140 BJC
|
Unknown at this Time
|
| Barr Systems
|
'BARRTCP1'
|
| Canon GP Series Copier/Printers
|
'print'
|
Canon imageRUNNER Printers
with internal Fiery LAN Adapter
|
same as EFI Fiery print server:
'print' or 'PRINT'
|
Canon imageRUNNER Printers
with imagePASS-M1 Print Controller
|
'pt1' or possibly 'lpt1'
|
| Canon imageCLASS Printers
|
'XJDIRECT'
|
| Castelle LANpress
|
'L1' for parallel port 1
'L2' for parallel port 2
|
| Castelle LANpress 3
|
'P1' for parallel port 1
'P2' for parallel port 2
'P3' for parallel port 3
|
| Cisco PPSX1 Print Server
|
same as LINKSYS Print Servers:
'L1'
|
D-Link DP-101
D-Link DP-300
D-Link DP-301 Plus
|
'LPT1_TEXT'
|
| D-Link DP-311P
|
Unknown at this Time
|
| D-Link DP-G321 wireless print server
|
'PS-xxxxxx-U1' (for USB Port 1)
'PS-xxxxxx-U2' (for USB Port 2)
'PS-xxxxxx-P3' (for LPT Port)
where 'xxxxxx' represents the last 6 digits of the print server MAC address.
|
| Datamax Printers
|
Unknown at this Time
|
| Decision Data
|
same as Printronix PrintNet:
'd1prn'
|
| Dell Laser Printers
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
| Digi Portserver
|
Does not support LPD
|
| Digi Portserver II
|
'raw_1' for parallel port 1
'raw_2' for parallel port 2
...
'raw_8' for parallel port 8
'raw_9' for parallel port 9
Parallel ports 10 - 16 are unknown at this time (possibly either 'raw_10 or 'raw_A' through 'raw_16' or 'raw_F').
|
| EFI Fiery Print Server
|
'print' or 'PRINT'
|
| Emulex
|
PASS or TEXT
Can be set to accept any value if the Emulex adapter is set to Passthru.
|
| Epson Interface Card
|
'LPB'
'LPBF'(for formfeed after splf)
|
| Extend Net 1005
|
'L1'
|
| Extended Systems
|
'portLF1' or 'anydata1' for parallel port 1
'portLF2' or 'anydata3' for parallel port 2
'portLF3' or 'anydata3' for parallel port 3
Note:
If 'portLF1', 'portLF2' or 'portLF3' causes a blank page before and after each spooled file, try using 'anydata1', 'anydata2' or 'anydata3' instead.
|
| GENICOM 5000 series with PS1000 series NIC
|
'PASSTHRU'
|
GENICOM 5000 series
with EasyCom Express NIC
|
'LPDPRT1'
|
| GENICOM 5000 Series With Emulex PS1000 Network Interface Card (Internal)
|
'GENICOM' (all uppercase)
|
| GENICOM Printers with Microplex M205, M206 or M305 NIC
|
same as Printronix PrintNet:
'd1prn'
|
| GENICOM Printers with Microplex M202 or M202+ external print server
|
same as Printronix PrintNet:
'd1prn1' for parallel port 1
'd2prn2' for parallel port 2
'd3com1' for serial port 1
'd4com2' for serial port 2
|
| GENICOM Printers with Printronix PrintNet
|
'd1prn'
|
| GENICOM Printers with MPS100
|
'MPS_nnnnnn_P1' where "nnnnnn" represents the last six digits of the MAC address
|
| Gestetner Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| Hawking Technology print server (parallel models)
|
'PS_Port-1', 'LP1' or 'lpt1'
|
| Hawking Technology print server (USB models)
|
'PS_Port-1', 'LP1' or 'lpt1'
|
| Hitachi DDS 32/40 Printers
|
'pcl5'
|
Hitachi DDS 50/62 Printers
(with internal Fiery LAN Adapter)
|
same as EFI Fiery print server:
'print' or 'PRINT'
|
HP DeskJet 5850 wireless printer
HP DeskJet 5850w wireless printer
|
No LPR Support
|
| HP JetDirect Card (Internal)
|
'raw' (formatted output)
'text' (unformatted text)
Note:
Some newer HP JetDirect cards, like the 170X and 300X, may instead use 'RAW' for formatted output or 'TEXT' for unformatted text.
|
HP JetDirect Server (External)
(3 Ports - 1 I/P Address)
|
'raw1' for parallel port 1 (formatted output)
'text1' for parallel port 1 (unformatted text)
'raw2' for parallel port 2 (formatted output)
'text2' for parallel port 2 (unformatted text)
'raw3' for parallel port 3 (formatted output)
'text3' for parallel port 3 (unformatted text)
Note:
Some newer HP JetDirect servers may instead use 'RAW1', 'RAW2' or 'RAW3' for formatted output or 'TEXT1', 'TEXT2' or 'TEXT3' for unformatted text.
|
| HP LaserJet with internal HP JetDirect card
|
'raw' (formatted output)
'text' (unformatted text)
Note:
Some newer HP JetDirect cards, like the 170X and 300X, may instead use 'RAW' for formatted output or 'TEXT' for unformatted text.
|
| HP LineJet Printer with internal HP LineJet print server
|
same as Printronix PrintNet:
'd1prn'
|
| HP WP110 Wireless print servers (External)
|
Unknown at this time
|
| HP Wireless Print Server (External)
|
'raw' (formatted output)
'text' (unformatted text)
|
| IBM 3130
|
'afccu2'
|
| IBM 4247
|
same as IBM Network Print Server (NPS):
'pr1'
|
| IBM 4400 Thermal Printer (Internal)
|
some printers same as IBM Network Print Server (NPS) and Axis LAN Adapters:
'pr1'
|
other printers same as Printronix PrintNet:
'd1prn' for single port
|
| IBM 6400 Network Connection (Internal)
|
same as Printronix PrintNet:
'd1prn' for single port
|
| IBM 6400 Network Connection (External)
|
same as IBM Network Print Server (NPS):
'pr1' for parallel port 1
'pr2' for parallel port 2
....
'pr8' for parallel port 8
|
| IBM OS/400 (R310 or Above to R310 or Above)
|
output queue name (for example. 'PRT01')
output queue library / output queue name (for example, 'QUSRSYS/PRT01')
*USER
*SYSTEM
|
| IBM OS/400 (R310 or Above to R230)
|
*USER
user ID (for example, 'QSECOFR')
|
IBM Infoprint 20 (4320)
IBM Infoprint 32 (4332)
IBM Infoprint 40 (4340)
IBM Infoprint 70 (2770)
|
'PASS' (formatted output)
'TEXT' (unformatted text)
|
IBM Infoprint 60 (3160)
IBM Infoprint 62 (4370)
|
'afccu2'
|
IBM Infoprint 1100 Series:
IBM Infoprint 1116
IBM Infoprint 1120
IBM Infoprint 1125
IBM Infoprint 1130
IBM Infoprint 1140
IBM Infoprint 1145
(with internal MarkNet NIC card)
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
IBM Infoprint 1200 Series:
IBM Infoprint 1222
IBM Infoprint 1226
(with internal MarkNet NIC card)
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
IBM Infoprint 1300 Series:
IBM Infoprint 1312
IBM Infoprint 1332
IBM Infoprint 1352
IBM Infoprint 1372
(with internal MarkNet NIC card)
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
IBM Infoprint 1400 Series:
IBM Infoprint 1410 MFP
IBM Infoprint 1412
IBM Infoprint 1422
(with internal MarkNet NIC card)
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
IBM Infoprint 1500 Series:
IBM Infoprint 1532 Express
IBM Infoprint 1552
IBM Infoprint 1572
IBM Infoprint 1585
(with internal MarkNet NIC card)
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
IBM Infoprint Color Series:
IBM Infoprint Color 1220
IBM Infoprint Color 1228
IBM Infoprint Color 1334
IBM Infoprint Color 1357
IBM Infoprint Color 1454
IBM Infoprint Color 1464
IBM Infoprint Color 1567
(with internal MarkNet NIC card)
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
| IBM Infoprint 6500 (with internal Ethernet print server)
|
same as IBM Network Print Server (NPS):
'pr1'
|
IBM Integrated Network Option
(IBM 4039, 4049, 3112, 3116)
|
same as Lexmark MarkNet XL (Internal):
'/prt0'
|
| IBM Network Print Server (NPS)
|
same as Axis LAN Adapters:
'pr1' for parallel port 1
'pr2' for parallel port 2
....
'pr8' for parallel port 8
|
IBM Network Printer 12, 17 or 24
(IBM 4312, 4317 or 4324)
|
'PASS' (formatted output)
'TEXT' (unformatted text)
Note:
'TEXT' appears to work best for the IBM Network Printer 20
|
| IBM Network Station
|
'PARALLEL1' for the parallel port
'SERIAL1' for the serial port
|
| IBM RS/6000 (Printer Attached to RS/6000 System)
|
printer queue name (case sensitive)
|
| i-Data EasyCom, PlusCom, LinkCom print servers
|
'LPDPRT1' or 'LPDPRT2'
|
| I-O LAN RPC print server
|
'tcp1' or 'tcp1_nt_nb_nff'
where the "_nt_nb_nff" indicates no trailer page, no banner page and no extra Form Feed (FF)
Note:
See the section entitled
Information Concerning Print Servers Designed for Twinax SCS Printers
below.
|
| I-O Multiprotocol print server (Single-Port)
|
'LPT' or 'LPT_nt_nb_nff'
where the "_nt_nb_nff" indicates no trailer page, no banner page and no extra Form Feed (FF)
|
| I-O Multiprotocol print server (Multi-Port)
|
'LPT1' or
'LPT1_nt_nb_nff'
for parallel port 1
'LPT2' or 'LPT2_nt_nb_nff' for parallel port 2
'COM1' or 'COM1_nt_nb_nff' for serial port 1
where the "_nt_nb_nff" indicates no trailer page, no banner page and no extra Form Feed (FF)
|
| Imagistics Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| 'print'
|
| Infotec Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| Intel Netport XL
|
'TEXT1' for parallel port 1
'TEXT2' for parallel port 2
'PASSTHRU' to disable blank page
|
| Intel Netport Pro
|
'LPTx_PASSTHRU' (formatted output)
'LPTx_TEXT' (unformatted text)
where x = port
(The PASSTHRU options will disable banner or trailer pages)
|
| Intel NetportExpress XL and Pro
|
'LPT1_PASSTHRU' for parallel port 1 (formatted output)
'LPT1_TEXT' for parallel port 1 (text)
'LPT2_PASSTHRU' for parallel port 2 (formatted output)
'LPT2_TEXT' for parallel port 2 (text)
'PASSTHRU' for serial port (formatted output)
'TEXT' for serial port (text)
'COM1_PASSTHRU' for serial port if 'PASSTHRU' does not work.
(The PASSTHRU options will disable banner or trailer pages)
|
| Intermec Printers (Internal)
|
same as IBM Network Print Server (NPS) and Axis LAN Adapters:
'pr1' for parallel port 1
'pr2' for parallel port 2
....
'pr8' for parallel port 8
|
| JETNet Card(?)
|
'PASS'
|
Konica printers
(with optional IP-XXX print controller)
|
'lptprt1'
|
Konica-Minolta printers
(with optional IP-XXX print controller)
|
'lptprt1'
|
| Lanier Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| Lantronix Print Servers
|
'DSS_TEXT' for single parallel port (unformatted text)
'EPS_nnnnnn_P1' for parallel port 1
'EPS_nnnnnn_P2' for parallel port 2
where "nnnnnn" represents the alpha-numeric name stamped on the device.
Note:
This is the default value for the Lantronix print server, but it can be changed by telnetting to the print server.
|
| Lantronix LPS
|
'LPS_nnnnnn_TEXT' for simple ASCII text or dot matrix printers.
'LPS_nnnnnn_PCL' for HP LaserJet compatible printers
'LPS_nnnnnn_PS' for PostScript printers
where 'nnnnnn' represents the alpha-numeric name stamped on the printer server.
Note:
This is the default value for the Lantronix print server, but it can be changed by telnetting to the print server.
|
| Lantronix MPS1-T and MPS1-2
|
'MPS_nnnnnn_TEXT' for text and Zebra bar code printers (unformatted text)
'MPS_nnnnnn_PCL' for HP LaserJet and compatible printers (formatted output)
where "nnnnnn" represents the alpha-numeric name stamped on the device.
Note:
This is the default value for the Lantronix print server, but it can be changed by telnetting to the print server.
|
| Lexmark MarkNet XL (Internal)
|
'/prt0'
|
Lexmark MarkNet XLe (External)
Lexmark MarkNet Pro (External)
Lexmark N4000e (External)
|
'/prt1' for parallel port 1
'/prt2' for parallel port 2
....
'/prt8' for parallel port 8
'/prt9' or '/ser' for serial port
|
Lexmark MarkNet Pro3 (External)
Lexmark MarkNet 2000 (External)
|
'/prt0' or '/par0' for parallel port 1
'/prt1' or '/par1' for parallel port 2
'/prt9' or '/ser' for serial port
|
| Lexmark Optra with internal MarkNet NIC card
|
'/prt0'
|
LINKSYS Print Servers (Internal)
LINKSYS Pocket Print Server (External)
|
'L1'
|
| LINKSYS Print Servers (Multi-Port External)
|
'L1' for parallel port 1
'L2' for parallel port 2
'L3' for parallel port 3
|
| Mannesman-Tally
|
'PR2'
|
Meto LIS-1830e Continuous Form Laser Imaging System
Meto LIS-1865e Continuous Form Laser Imaging System
|
'LIS_METO' or 'lis_meto' (not case sensitive)
|
Microplex M205 (Internal)
Microplex M206 (Internal)
|
same as Printronix PrintNet:
'd1prn'
|
Microplex M202 (External)
Microplex M202+ (External)
|
same as Printronix PrintNet:
'd1prn1' for parallel port 1
'd2prn2' for parallel port 2
'd3com1' for serial port 1
'd4com2' for serial port 2
|
| MiLAN Technology FastPort Print Servers
|
'FPxxxxxx'
where 'xxxxxx' represents the last 6 digits of the print server MAC address.
|
| Minolta Di6200 Print Server
|
same as EFI Fiery print server:
'print' or 'PRINT'
|
| Minolta PageWorks 25
|
'PORT1_PASTHRU'
|
| MINOLTA-QMS CrownNet Print Servers
|
'raw'
|
| Mita
|
'LPAF'
|
| Monarch Thermal Label Printers (Internal)
|
printer queue name specified in the printer or print server hardware (case sensitive)
|
| Nashuatec Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| Netgear
|
'L1' for parallel port 1
'L2' for parallel port 2
|
| Net Print (Internal)
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
Oc printers
(with external Fiery LAN Adapter)
|
same as EFI Fiery print server:
'print' or 'PRINT'
|
| Oc 3155/3165 Digital Copier
|
printer queue name configured through OS/2 Warp on attached Dell PC (case sensitive)
|
| OKI Print Servers
|
'lp'
|
| Osicom JetXPrint (Internal)
|
'PORT1'
|
| Osicom NetPrint (External)
|
'PORT1' for parallel port 1
'PORT2' for parallel port 2
|
| Panasonic DP-3510 Printer (Internal)
|
'lp'
|
| Printek (Internal)
|
same as IBM Network Print Server (NPS) and Axis LAN Adapters:
'pr1'
|
| Printronix Printers with Printronix PrintNet adapters
|
'd1prn' for single port
'd1prn' for parallel port 1
'd2prn' for parallel port 2
'd3prn' for parallel port 3
'd4prn' for parallel port 4
|
| Rex-Rotary Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| Ricoh Aficio Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| Ricoh EB70, EB105, EB105E Printers
|
'print'
|
| Samsung printers
|
Unknown at this Time
|
| Sato Printers
|
*NONE
Note:
Presumably, Sato printers with internal Sato print servers will work with any RMTPRTQ value.
|
| Savin Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| Sharp Printers
|
same as Osicom JetXPrint (Internal):
'PORT1'
|
| StarTech Print Servers
|
'lpt1' for parallel port 1
'lpt2' for parallel port 2
'lpt3' for parallel port 3
|
| Symbol CB1000 Wireless Print Servers
|
'raw'
|
| TallyGENICOM
|
Depends on the printer model. See the entries for GENICOM and Mannesmann-Tally printers above.
|
| Tektronix Phaser 550 Printer
|
'PS', 'HPGL', 'PCL', or 'AUTO'
The PCL or AUTO should work in most cases.
|
| Toshiba DC Printers and Digital Copiers
|
'raw'
|
| Toshiba eStudio Printers
|
'direct' or 'dssc'
|
| TransAct Ethernet Adapter
|
'PORT1'
|
| TRENDnet print servers
|
'lpt1'
|
| Troy
|
'raw'
|
| Typhoon
|
'pcl5'
|
| Unisys WinPath 3000 Series Terminals
|
same as WYSE Terminals:
printer name (case sensitive) specified in the LPD Config on the terminal
Note:
See the section entitled
Information Concerning WYSE and Unisys 3000 Series Terminals
below.
|
| Unix (Printer Attached to Unix System)
|
printer queue name (case sensitive)
|
| Windows 95, Windows 98 and Windows ME
|
LPD queue name (case sensitive)
Note:
See the section entitled
Information Concerning Using a Third-Party Line Printer Daemon (LPD) Program
below.
|
Windows NT
Windows 2000
Windows 2003 Server
Windows XP Professional
|
printer share name (case sensitive)
Note:
See the section entitled
Information Concerning Windows NT, Windows 2000, Windows 2003 Server and Windows XP Professional
below.
|
| WYSE 3000 Series Terminals
|
printer name (case sensitive) specified in the LPD Config on the terminal
Note:
See the section entitled
Information Concerning WYSE and Unisys 3000 Series Terminals
below.
|
| XCD
|
'BINARY_P1' for parallel port 1 (formatted output)
'TEXT_P1' for parallel port 1 (unformatted text)
'BINARY_P2' for parallel port 2 (formatted output)
'TEXT_P2' for parallel port 2 (unformatted text)
'BINARY_S1' for serial port 1 (formatted output)
'TEXT_S1' for serial port 1 (unformatted text)
|
| Xerox 4517
|
'PASSTHRU'
|
| Xerox DC230 Printer
|
'lp'
|
| Xerox N40
|
'lp'
|
| Zebra Printers with ZebraNet Print Server (MPS1-T and MPS1-2)
|
same as Lantronix MPS1-T and MPS1-2:
'MPS_nnnnnn_TEXT' for text and Zebra bar code printers (unformatted text)
where "nnnnnn" represents the alpha-numeric name stamped on the device.
Note:
This is the default value for the ZebraNet print server; however, it can be changed by telnetting to the print server.
|
| Zebra Printers with ZebraNet Print Server II (External)
|
same as Extended Systems:
'portLF1' for parallel port 1
'portLF2' for parallel port 2
'portLF3' for parallel port 3
|
| Zebra Printers with ZebraNet Print Server II (Internal)
|
same as Extended Systems:
'portLF1'
|
| Zonet ZPS 3603 external print server
|
'LPT1' for parallel port 1
'LPT2' for parallel port 2
'LPT3' for parallel port 3
|
